Reference #1

Motor Shaft Oil Seal

Reference #2

Motor Shaft Ball Bearing Assembly

Reference #3

Internal Retaining Ring

Reference #4

Bearing Assembly – Needle
11/16″ I.D. (36 Rollers, Grease Retained)

Reference #5

Bronze Thrust Bearing

Reference #6

Thrust Washer 11/16″ I.D.
*Used with 14 tooth pinion load brake shaft – BH-1207

Reference #7

Shaft & Integral Pinion Load Brake 14 Teeth

Shaft & Integral Pinion Load Brake 23 Teeth

Shaft & Integral Pinion Load Brake 36 Teeth

Reference #8

Woodruff Key

Reference #9

Load Brake Retainer Spring

Reference #10

Load Brake Spring (Plain – No Color Code)

Load Brake Spring – Yellow Color Code

Reference #11

Grooved Pin

Reference #12

Cam – Load Brake

Reference #13

Gear & Clutch Assembly – Load Brake 1/4 H.P. Motor

Gear & Clutch Assembly – Load Brake 1/2 H.P. Motor

Gear & Clutch Assembly – Load Brake 1 H.P. Motor

Reference #14

Load Brake Friction Disc

Reference #15

Ratchet Bushing

Reference #16

Load Brake Flange

Reference #17

Bearing Assembly – Needle 5/8″ I.D.

Reference #18

Thrust Washer 5/8″ I.D.

Reference #19

Brake Flange Snap Ring

Reference #20

Load Brake Pawl & Ratchet Assembly (Includes Item 15)

Reference #21

Sprocket Gear Snap Ring

Reference #22

Gear Sprocket 74 Teeth

Gear Sprocket 65 Teeth

Gear Sprocket 52 Teeth

Reference #23

Hex Socket, Head Cap Screw

See BH-1059

Reference #24

Lock Washer – Spring Type

Reference #25

Sprocket Bearing Retainer
Plate

Reference #27

Sprocket Ball Bearing Assembly

Ball Bearing on Later Model Hoists

Reference #28

Coil Chain Sprocket 1/4″ Dia. Wire

Reference #30

Sprocket Ball Bearing Assembly

Reference #31

Woodruff Key

Reference #32

O-Ring

Reference #33

Seal Disk

Reference #34

Oil Seal

Reference #34

1/4 HP Clutch Assembly

This gear and clutch assembly should not be field disassembled. Replace assembly only as clutch pressure is preset at factory based on hoist capacity and motor H.P.

Replaces Items 9-16 on non-load brake equipped models

1/2 HP Clutch Assembly

This gear and clutch assembly should not be field disassembled. Replace assembly only as clutch pressure is preset at factory based on hoist capacity and motor H.P.

Replaces Items 9-16 on non-load brake equipped models

1 HP Clutch Assembly

This gear and clutch assembly should not be field disassembled. Replace assembly only as clutch pressure is preset at factory based on hoist capacity and motor H.P.

Replaces Items 9-16 on non-load brake equipped models